Cooler Master Nepton 120XL Review

The installation (which can be found in the video, or rough steps in the gallery below) was really easy. You have to get a big fiddly with screws and clips on the back plate, but other than that, it is straight forward. Screw in the correct brackets into the pump unit, put the backplate on the board, and screw the 4 nuts in, then some thermal paste on the CPU. Lastly you drop the pump onto the chip and screw it in in a diagonal manor, then plug in the three 4 pin PWM fan headers. The fans actually come with an anti-vibration mount you put between the fans and radiator, which make it a lot quieter and pretty easy to install!