MSI B550 Gaming Carbon WiFi Review

Keep a positive approach in your thoughts so that it becomes easy to reduce stress in your life by looking at the balance between your body and mind. cheap viagra http://appalachianmagazine.com/2017/03/25/are-you-friends-with-isis-on-facebook/ In the recent times, the numbers of cases were reported for cardiac arrest with the introduction of tadalafil uk . Make sure that you do not practice more than one 20mg tadalafil pill before the completion of 24 hours as it can be dangerous for their health. This is done by cialis generico online following the principles set out in the Linden Method.

If you are looking for a solid B550 motherboard, you’ve come to the right video. MSI’s B550 Gaming Carbon is a well built board with overkill VRMs, WiFi 6, 2.5G ethernet and PCIe Gen 4 support – all for a pretty premium price, much like every other B550 board sadly. Let me walk you through it, test it out and see how it handles the high end Ryzen CPUs, but first, if you haven’t already, consider subscribing for more videos every Monday, Wednesday and Friday!

Starting with the important bit, the VRMs. MSI uses a 12+2+1 phase setup here, with an IR35201 controller and 12 TDA21462 drivers, rated for 60 amps each, which at 1.2V would be providing just shy of 900W to the CPU – a far cry from the 150 or so even the 3950X needs. Under load, the VRM sat at between 40 and 50°c, in part thanks to it’s large heatsinks, the larger of the two is actually the whole rear I/O cover. Definitely overbuilt.

Right, so it can handle any chip you can throw at it, what else? Well, as with all B550 boards, it supports PCIe Gen 4 – sort of. It supports 1 PCIe Gen 4 GPU to the top X16 slot, and 1 gen 4 SSD in the top M.2 slot, but despite B550 now supporting bifurcation, the second x16 slot, and all other M.2 and PCIe slots, all all connected through the chipset which has a gen 3 link so would be a bottleneck if you are using say a second SSD and a say 10Gb network card but for the vast majority of people that’s not a concern.

CPU support wise, just like every other B550 motherboard, it’s only validated for 3rd gen Ryzen CPUs. While you may be able to get it to boot and even run with a 2nd or 1st gen chip, it’s not actively ‘supported’, so best to stick with the cheaper B450 boards anyway there. 

I/O wise, it’s decently kitted out. You’ve got 2.5G ethernet, WiFi 6, the usual USB 3.2 Gen 2, Gen 1, USB 2 and even a PS/2 port should you need, along with 7.1 audio with SDPIF powered by this thicc boi, basically a realtek ALC1220 like every other board out there, but with a chonker of an RF shield. 

Moving onto the BIOS, it’s the same one you’ll find on any MSI board right now, nice and easy to use – i still love their boot priority slider – and XMP profiles with big toggle switches which is great. Advanced mode lets you overclock easily, including every memory timing under the sun. 

And that’s that really. It’s a good board, although sadly like most B550 boards it comes at a pretty hefty premium over last gen – £215 right now, instead of £140 for a B450 carbon – and I’m not sure that it’s going to be worth it for most. Sure PCIe Gen 4 is a nice to have, but I know plenty of people with SATA or budget NMVe drives who are just fine with that, so unless you really want support for 4th gen Ryzen without an irreversible BIOS update, I’d probably stick with B450 for now.